Concrete sealer is based on a thermoplastic acrylic resin to give flexibility and UV resistance. It is suitable for application to seal concrete floors and bock paving driveways and will provide a hard wearing, water, petrol and oil resistant.
Concrete sealer is based on a thermoplastic acrylic resin to give flexibility and UV resistance. It is suitable for application to seal concrete floors and bock paving driveways and will provide a hard wearing, water, petrol and oil resistant.
Additional information
Technical Details
Components, Dry to touch, Finish, Overcoating time, Shelf Life, Stock Colours:, Tintable, Type
Area of use
Exterior: roof areas, gutters, lead flashing, slates, asbestos, cement, metal, asphalt, old
roofing felt, bay window and porch areas
Substrates
A wide variety of roofing materials
New roofing felts (or similar materials) can be highly porous and friable (because of the green/grey
stone flakes on the top) they also contain high levels of bitumen, it is recommended that these types of
new surfaces are allowed to weather for a minimum of 6 – 8 months before the application of Roofix.
Packing
1 litre, 5 litres and 20 litres
Physical Constants
Colours: Black, White, Grey & Solar Reflective
Finish: Semi gloss
Volume solids: 48%
Theoretical spreading rate: 1 sq. metre per litre
Flash point: 42°C
Specific gravity: 1.1 kg/litre
Dry to touch: 16 hours (20°C)
Curing time: 2 – 3 days
*The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A
practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant
consumption factor. The physical constants are subject to normal manufacturing tolerances.
Application Details
Application method: Brush, soft broom, trowel or spreader
Thinner: White Spirit
Cleaning of tools: White Spirit
Surface condition The surface should be stable, firm, dry and free of dust, sand, loose old
paint, dirt, grease and oil. Should not be applied in the rain or when rain
is likely. Pooled water must be removed before application.
Please refer to the Material Safety Data Sheet for further information.
For additional guidance please contact us here
Please check colour before use.If using multiple cans please check batch numbers are the
same.
Reviews
There are no reviews yet.