A quick drying non-toxic low odour single pack water based acrylic paint designed to seal,
colour and protect concrete floors. Contains dolomite stone for added strength and anti-slip*
properties. Excellent water, petrol and oil resistant also ideal for general walkways. Excellent
long lasting durability and colour retention. The toughest water based acrylic floor paint that
FLAG has ever made!
*Important Note: This product has anti-slip properties and therefore provides slip
resistance, however, it is not possible to guarantee a totally non-slip surface.
Stir well before use. Mix tins with different batch numbers together before use.
Caution: Store above 5°C Do not apply if surface temperature is below 10°C.
Reviews
There are no reviews yet.
Be the first to review “Flag Anti Slip Water Based Floor Paint” Cancel reply
Area of use
Exterior: roof areas, gutters, lead flashing, slates, asbestos, cement, metal, asphalt, old
roofing felt, bay window and porch areas
Substrates
A wide variety of roofing materials
New roofing felts (or similar materials) can be highly porous and friable (because of the green/grey
stone flakes on the top) they also contain high levels of bitumen, it is recommended that these types of
new surfaces are allowed to weather for a minimum of 6 – 8 months before the application of Roofix.
Packing
1 litre, 5 litres and 20 litres
Physical Constants
Colours: Black, White, Grey & Solar Reflective
Finish: Semi gloss
Volume solids: 48%
Theoretical spreading rate: 1 sq. metre per litre
Flash point: 42°C
Specific gravity: 1.1 kg/litre
Dry to touch: 16 hours (20°C)
Curing time: 2 – 3 days
*The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A
practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant
consumption factor. The physical constants are subject to normal manufacturing tolerances.
Application Details
Application method: Brush, soft broom, trowel or spreader
Thinner: White Spirit
Cleaning of tools: White Spirit
Surface condition The surface should be stable, firm, dry and free of dust, sand, loose old
paint, dirt, grease and oil. Should not be applied in the rain or when rain
is likely. Pooled water must be removed before application.
Please refer to the Material Safety Data Sheet for further information.
For additional guidance please contact us here
Please check colour before use.If using multiple cans please check batch numbers are the
same.
Reviews
There are no reviews yet.