£11.63 – £34.96
A clear single pack water-borne algicidal wash. For use as a surface biocide. A very effective
biocide to protect against mould, lichens and algae. Long term protection against re-growth.
Simple to apply. Can be over-coated with most conventional paints. For further protection
overcoat the treated areas with Asipo paints.
Directions for use:
Dilute with 4 parts water to 1 part Asipo Algicidal Treatment.
Apply liberally with a brush, sponge or cloth and wipe off (before allowing it to dry).
Stubborn areas may require a further application or try leaving the treatment to work longer
before wiping off. Clean the treated areas with clean water or a mild cleaning solution.
For use on a wide variety of external building substrates. Suitable for use as an algicidal wash
on patios, external paving, roof tiles/substrates, decking, brick & block work.
| Brand | |
|---|---|
| Colour | Clear |
Area of use
Exterior: roof areas, gutters, lead flashing, slates, asbestos, cement, metal, asphalt, old
roofing felt, bay window and porch areas
Substrates
A wide variety of roofing materials
New roofing felts (or similar materials) can be highly porous and friable (because of the green/grey
stone flakes on the top) they also contain high levels of bitumen, it is recommended that these types of
new surfaces are allowed to weather for a minimum of 6 – 8 months before the application of Roofix.
Packing
1 litre, 5 litres and 20 litres
Physical Constants
Colours: Black, White, Grey & Solar Reflective
Finish: Semi gloss
Volume solids: 48%
Theoretical spreading rate: 1 sq. metre per litre
Flash point: 42°C
Specific gravity: 1.1 kg/litre
Dry to touch: 16 hours (20°C)
Curing time: 2 – 3 days
*The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A
practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant
consumption factor. The physical constants are subject to normal manufacturing tolerances.
Application Details
Application method: Brush, soft broom, trowel or spreader
Thinner: White Spirit
Cleaning of tools: White Spirit
Surface condition The surface should be stable, firm, dry and free of dust, sand, loose old
paint, dirt, grease and oil. Should not be applied in the rain or when rain
is likely. Pooled water must be removed before application.
Please refer to the Material Safety Data Sheet for further information.
For additional guidance please contact us here
Please check colour before use.If using multiple cans please check batch numbers are the
same.
Whether you need expert advice on surface preparation techniques, or application tips, our team is always here to help!
PAINTS4YOU LIMITED Your ultimate destination for all your painting and finishing needs.
Company number: 16136526
VAT Number: 482 1803 93
© 2025 All Rights Reserved.
Joe –
I used this on my roof before using the roofix I purchased from here and it was really great stuff! Would definitely recommend