Description

Flag Asipo Internal Anti mould Emulsion contains many encapsulated biocide additives, that have been uniquely formulated to combat high risk internal areas of any room. Which is usually humid & condensation is consistent which often leads to growth algae and mould.

Asipo is ideal as it has a superior water-based matt white finish. Flag Asipo anti mould emulsion has an ideal life span that can achieve 10 years which will protect from mould & algae from returning within that time. Asipo is very easy to apply either with a brush or roller and will give you a very transforming matt white finish. Asipo Anti Mould Internal can be applied to masonry and plaster and Internal wall and ceiling areas.

 Asipo Features & Benefits.

• Available in a Matt Finish.
• Water-based decorative emulsion.
• Provides long-term protection from mould and algae
• Designed to stop contamination and discolouration on masonry and plaster
• Economic and easy to apply, providing a long lasting durable finish
• Internal wall and ceiling areas
• Available in a Matt Finish.

Sealing/Primer

• On new plaster a sealant coat is recommended, this can be achieved by thinning the paint by
  10% with water.

Area of use

• Internal wall and ceiling areas.
• kitchen & Bathroom.

Substrates

masonry and plaster

Physical Constants

Colours: White
Finish: Matt
Volume solids: 48%
Theoretical spreading rate: 12 sq. metres per litre
Flash point: N/A
Specific gravity: 1.25 – 1.4
Dry to touch: 2 hours (20°C)
Overcoating time: 4 hours

*The theoretical spreading rate has been calculated for the stated volume solids and dry film
thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the
substrate, and the relevant consumption factor. The physical constants are subject to normal
manufacturing tolerances.

Application Details

Application method: Brush or roller
Thinner: Water
Cleaning of tools: Water

Surface condition

The surface should be stable, firm, dry and free of dust sand, loose old paint, dirt, grease and oil. It is recommended to apply a primer prior to the specified filling procedure. Touch-up with primer on areas repaired with filler is recommended prior to application of topcoats. Please refer to the Material Safety Data Sheet for further information. For additional guidance please contact us here
Please check colour before use. If using multiple cans please check batch numbers are the same.

Flag Asipo Algicidal Treatment – Paints 4 You is ideal for removing Mould & algea and has rapid effect before using Asipo Internal Decorative paint and is highly recommended.