Description

Warehouse Floor paint Non-Slip The Best.

How good is Flag Anti-Slip Heavy Duty Warehouse Paint

Flag Heavy Duty Anti-Slip Warehouse Floor Paint is one of the best Floor Paints available on the market, with its unique blend of polyurethane resins giving one the best protections for high traffic areas. with its Anti slip properties this is definitely a must have for any warehouse.

Where can i use Flag Heavy Duty Floor coating?

Flags Heavy Duty floor coating is not only just specially made for warehouses but also car parks, stairs, walkways, high traffic public areas, and industrial work areas.

Does it provide Anti-Slip Protection?

YES Flag heavy duty Coating has Anti-Slip properties that help reduce the risk of falls and trips!

HD Thinner provides excellent thinning properties to mix with your floor paint,

Flag HD Floor Paint Thinners

A blend of high quality thermo-acrylic and polyurethane resins resulting in a heavy duty
coating that offers excellent protection for high traffic areas. This product is Elastomeric and
therefore offers high levels of flexibility for a long lasting durable finish. Ideal for areas that are
subjected to frequent heavy use eg. car parks, stairs, walkways, high traffic public areas, and
industrial work areas. Contains Dolomite stone to provide anti-slip properties. This product
has a very fine textured, almost smooth, finish.
*Important Note: This product has anti-slip properties and therefore provides slip
resistance, however, it is not possible to guarantee a totally non-slip surface.

Sealing / Priming
It is only necessary to seal a porous substrate such as new or bare concrete. A sealer coat is
achieved by adding 10% HD Thinner to the paint. Please note new concrete floors can only
be painted after 6-8 weeks.

Area of use:
Internal and External

Substrates:
Concrete, Stone, Tarmac & Asphalt (if suitably aged), Ferrous Metals, Wood

Packing:
5 Litres & 20 Litres
Physical Constants:
Colour: Red, Grey, Green, Blue, Black and Safety Yellow
Finish: Satin
Volume solids: 55%
Theoretical spreading rate: 10 – 12 sq.metres per litre
Flash point: 42ºC
Specific gravity: 1.22
Dry to touch: 2 Hours
Over-coating time: 24 Hours
*The theoretical spreading rate has been calculated for the stated volume solids and dry film
thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the
substrate, and the relevant consumption factor. The physical constants are subject to normal
manufacturing tolerances.

Application Details:
Application method: Brush or Roller
Thinner: HD Thinners
Cleaning of tools: HD Thinners
Surface Condition: The surface should be stable, firm, dry and free of dust, sand,
loose old paint, dirt, grease and oil.
For additional guidance (eg. power-floated floors, existing coatings, possible existing
contamination etc.) please contact us here
colour before use. If using multiple cans please check batch numbers are the same.